News

Read our carefully curated blogs about everything auto parts.

Heidenhain TNC Control panel
16 November, 2026

Heidenhain TNC control hardware faults: MC, LE ...

A Heidenhain TNC that will not boot is almost always one of four boxes, and the cabinet tells you which one before you open a manual. On a TNC 426...

16 November, 2026

Heidenhain TNC control hardware faults: MC, LE and UV units

A Heidenhain TNC that will not boot is almost always one of four boxes, and the cabinet tells you which one before you open a manual. On a TNC 426 or TNC 430 the whole control is a single LE...

Read More
11 November, 2026

SICK sensor faults: reading the LEDs and the type co...

A line stops, the operator points at a sensor and says it is dead. On a SICK sensor you can usually settle that in ten seconds without a meter, because...

Read More
26 October, 2026

SIMATIC S7 CPU LED Faults: What SF, BF, INTF and EXT...

The CPU is in STOP, a red LED is lit, and the line has been down for half an hour. Read the front panel in two halves. RUN and STOP...

Read More
Modicon Premium and Quantum CPU Replacement: PL7, Concept or Unity
19 October, 2026

Modicon Premium and Quantum CPU Replacement: PL...

What decides whether a replacement Modicon processor runs your existing application is the operating system in it, not the rack it drops into, and the reference on the front label...

19 October, 2026

Modicon Premium and Quantum CPU Replacement: PL7, Co...

What decides whether a replacement Modicon processor runs your existing application is the operating system in it, not the rack it drops into, and the reference on the front label...

Read More
Heidenhain encoders sample
14 October, 2026

Which HEIDENHAIN Encoder Interface Do You Need?...

A dead encoder on an axis, the label photographed, a quote in your inbox for the same model. Before you order, settle the one thing the label almost never prints:...

14 October, 2026

Which HEIDENHAIN Encoder Interface Do You Need? 1 Vp...

A dead encoder on an axis, the label photographed, a quote in your inbox for the same model. Before you order, settle the one thing the label almost never prints:...

Read More
SINAMICS S120 module
13 October, 2026

Which SINAMICS S120 module do I order? Reading ...

A SINAMICS S120 order number breaks into four parts, and each one answers a question you need answered before you buy. The first eight characters give the module family and...

13 October, 2026

Which SINAMICS S120 module do I order? Reading the 6...

A SINAMICS S120 order number breaks into four parts, and each one answers a question you need answered before you buy. The first eight characters give the module family and...

Read More
28 September, 2026

Schneider Modicon Premium and Quantum LED Faults: Wh...

The line is down and your only diagnosis is four small lamps on the front of the processor. On a Modicon Premium that is enough. Steady ERR is a processor...

Read More
Fagor 8055 CNC sytem
23 September, 2026

Fagor 8055 Error Codes: What the Number Tells You

An operator reads you a four digit number off a Fagor 8055 screen, and that number has already narrowed the fault down. Fagor groups the 8055 error list in blocks...

23 September, 2026

Fagor 8055 Error Codes: What the Number Tells You

An operator reads you a four digit number off a Fagor 8055 screen, and that number has already narrowed the fault down. Fagor groups the 8055 error list in blocks...

Read More

Get in touch with us

Share your contact information with us, and our team will contact you soon to assist with any questions or requests.